Forget Me Not Cluster 5: Installation and Styling Tips

By Danish Design Lighting & Furniture – UMAGE US | Published: 2026-10-28

Category: How-to Guides

Learn how to install and style the Forget Me Not cluster 5 lamp set. Get step-by-step guidance for hanging and arranging these oak veneer pendants.

Quick answer

Install the Forget Me Not cluster 5 by mounting the Rosette Mini canopy, wiring the cord set, and attaching the five oak veneer shades. Style them at varying heights for a natural, flower-like arrangement.

Before you start: Tools and safety

You will need a voltage tester, wire strippers, a screwdriver, and a ladder. Turn off power at the circuit breaker before touching any wires. If you are not comfortable with electrical work, hire a licensed electrician.

Choosing the right location

This cluster works best over a dining table, kitchen island, or in a living room corner. The five shades spread light evenly, so allow at least 24 inches of clearance from the ceiling to the top shade for proper airflow and visual balance.

Installation steps

Mount the canopy: Attach the Rosette Mini canopy to the ceiling junction box using the provided screws. Ensure it is secure and level. Common mistake: Overtightening can crack the canopy; hand-tighten only.
Wire the cord set: Connect the black (live), white (neutral), and green/copper (ground) wires from the cord set to the corresponding house wires using wire nuts. Tuck connections neatly into the canopy. Checkpoint: Use a voltage tester to confirm power is off before touching wires.
Attach the shades: Screw each of the five Forget Me Not shades onto the cord set sockets. Twist gently until snug, but do not force. Common mistake: Cross-threading the socket can damage the shade; align threads carefully.
Adjust the heights: Slide the cord adjusters on each pendant to create varied lengths. Aim for a spread of 4–8 inches between the lowest and highest shade for a natural cluster look. Checkpoint: Step back and view from multiple angles before finalizing heights.
Install bulbs and test: Screw in compatible bulbs (E12 base, max 40W per socket). Restore power and test each light. Replace the canopy cover if included. Common mistake: Using bulbs with a larger diameter than the shade opening can cause overheating; check dimensions first.

Product details

Forget Me Not cluster 5 | lamp set: Made from oak veneer, Forget Me Not is a lamp inspired by the flower of the same name. Its organic shape will add warmth and vitality to the home. The natural wood grain and curved petals create a soft, sculptural look that works in both modern and rustic interiors.
Forget Me Not cluster 5 | lamp set