Asteria Pendant Lamp: How to Change the Metal Cover
By Danish Design Lighting & Furniture – UMAGE US | Published: 2026-10-31
Category: How-to Guides
Refresh your Asteria pendant in minutes by swapping its metal cover. Follow these steps to remove, fit, and care for the cover without damaging the lamp.
Quick answer
To change the metal cover on your Asteria pendant lamp, first switch off and cool the lamp, then gently detach the existing cover and click the new one into place. No tools are needed, and the swap takes only a few minutes.
Why the cover is worth swapping
The metal cover is the small ring that sits at the top of the Asteria shade. Changing it lets you shift the lamp's accent from steel to black, or the reverse, without buying a new pendant. It's a simple way to refresh a room or to match a new colour scheme.
The cover is available in steel and black, and it's designed to fit Asteria pendants. If you're unsure which size you need, check your pendant's size before ordering; the cover is sold separately from the lamp.
When to replace rather than repaint
If the cover is scratched or faded, replacement is usually faster and more reliable than repainting. A new cover also guarantees a precise colour match with other metal details in the room. Keep in mind that the cover is a small component, so it's a low-cost way to update the look without replacing the entire lamp.
Steps to change the Asteria metal cover
- Switch off and let the lamp cool: Turn off the power at the switch and wait at least 10 minutes for the lamp to cool completely. This prevents burns and avoids accidentally touching the LED panel. Never skip the cooling time, even if the lamp was only on briefly.
- Remove the old cover: Grip the metal cover gently and pull it straight off the top of the shade. If it resists, don't force it; check for a small locking tab or screw that may need releasing first. Forcing the cover can bend the shade or scratch the finish.
- Align the new cover: Hold the new cover so its opening lines up with the top of the shade. The cover is designed to fit only one way, so if it doesn't sit flush, rotate it until it does. A cover that won't seat easily is usually misaligned, not defective.
- Press firmly into place: Push the cover down evenly with both hands until it clicks or sits tight against the shade. Give it a light tug to confirm it's secure. A loose cover can rattle or fall, so always test the fit.
- Restore power and check: Turn the power back on and switch on the lamp. The cover should sit flush and the light should appear even, with no shadows around the top. If you see uneven light, switch off and reseat the cover.
Product facts
- Asteria | pendant lamp: The Asteria pendant lamp has a built-in LED panel that is dimmable with an external dimmer and a white diffuser for soft illumination. Because the LED is built in, you'll never need to change a bulb, so the metal cover is the main part you can update for a new look.
Asteria | pendant lamp - Asteria Metal Cover | component: The Asteria Metal Cover is available in steel and black and is designed to refresh your pendant in minutes. You can choose the colour that best suits your space and swap it whenever you want a change, without tools.
Asteria Metal Cover | component
