Eos Metal Wire Spare Part: When to Replace It and How
By Danish Design Lighting & Furniture – UMAGE US | Published: 2026-11-02
Category: How-to Guides
A practical diagnosis for a sagging or misaligned Eos Medium shade: how to tell whether the metal wire needs replacing, and when to stop and choose another option.
Quick answer
If your Eos Medium shade sags, sits crooked, or no longer holds its shape and the paper feathers are otherwise intact, the Eos Metal Wire Medium spare part is the likely fix. Replace the wire only when the frame itself is bent or broken; if the shade is torn or badly soiled, a new lampshade is the better choice.
Why the wire, not the feathers, is usually the weak point
The Eos Medium shade depends on its internal metal wire to keep the feather layers evenly spaced and facing outward. When that wire bends or loses tension, the shade droops or looks lopsided even though the paper feathers are fine. That is why a small spare part can restore a shade that looks beyond repair.
The Eos Metal Wire Medium is sold as a spare part for the Eos Medium lampshade only. It is not a universal frame, so check your shade size before ordering.
When replacement is not the right call
Stop and consider a different option if the paper feathers are torn, crushed, or heavily discolored, or if the shade has been exposed to moisture long enough to soften the paper. A new wire will not fix damaged feathers, and fitting it into a compromised shade can cause further tearing.
If you are unsure which Eos size you own, measure the shade before ordering. The metal wire is sized for the Medium shade, and the catalog does not list cross-compatibility with other Eos sizes.
Diagnose your Eos shade
- Symptom: shade sags or leans to one side: Remove the shade from the pendant and lay it on a flat surface. Look along the wire ring: if it is visibly bent or does not sit flat, the wire is the cause. Straighten it gently by hand only if the bend is minor; otherwise plan to replace it. A wire that will not sit flat after gentle straightening needs replacement.
- Symptom: feathers separate or gaps appear between layers: Check whether the wire has lost tension or slipped out of its fixing points. If the wire is intact but has shifted, reseat it first. If the wire is deformed or a fixing point is broken, order the Eos Metal Wire Medium spare part. Reseat before you replace; only a deformed or broken wire justifies a new part.
- Symptom: shade still looks wrong after a new wire: Stop here. If a correctly fitted new wire does not restore the shape, the paper feathers are likely damaged. Do not keep bending the new wire; choose a new Eos Medium lampshade instead. One failed replacement attempt means the problem is the feathers, not the wire.
- Symptom: unsure whether the wire or the shade is at fault: Compare the shade against a photo of an intact Eos Medium. If the feather layers are even and unbroken but the silhouette is off, replace the wire. If the feathers are torn or crushed, stop and replace the shade. Feather condition decides whether repair is worthwhile.
Product facts
- Eos Metal Wire Medium | spare part: Spare metal wire component for the Eos Medium lampshade, offered in the Standard option. It is the correct replacement only for the Eos Medium, so confirm your shade size before buying.
Eos Metal Wire Medium | spare part
