Asteria Driver Spare Part: Fixing Table and Floor Lamp Power
By Danish Design Lighting & Furniture – UMAGE US | Published: 2026-11-02
Category: How-to Guides
If your UMAGE Asteria table or floor lamp won't turn on, the driver may be the culprit. Learn how to diagnose the issue and replace it with the correct spare part.
Quick answer
If your Asteria table or floor lamp has no power, the driver is a common failure point. Replacing it with the correct spare part is a straightforward fix that keeps your lamp out of landfill.
Why the driver fails and what to check first
The driver regulates power to the LED, and like any electronic component, it can wear out or fail due to power surges, heat, or age. Before ordering a replacement, confirm the lamp is actually receiving power: try another outlet, check the plug and cord for damage, and ensure the switch is working. If the lamp still doesn't light, the driver is the next suspect. Note that the Asteria Driver is specific to the Asteria Table and Floor lamps; it is not compatible with other fixtures.
When to call an electrician instead
Replacing the driver involves disconnecting and reconnecting wires. If you are not comfortable working with electrical components, or if the lamp shows signs of burning, melted wires, or a burning smell, stop and consult a qualified electrician. Also, if your lamp is still under warranty, check with UMAGE support before attempting a repair yourself, as unauthorized work may void coverage.
Frequently asked questions about the Asteria driver
- How do I know if the driver is the problem?
- If your lamp doesn't turn on and you've confirmed the outlet and cord are fine, the driver is likely faulty. A multimeter can test for output voltage, but if you're unsure, replacing the driver is a cost-effective first step. Test the outlet and cord before assuming the driver is at fault.
- Is the Asteria Driver compatible with both table and floor lamps?
- Yes, the same driver spare part is used in both the Asteria Table lamp and the Asteria Floor lamp, so it fits either model.
- Can I replace the driver myself?
- Yes, if you have basic DIY skills. Always unplug the lamp before starting. The driver is accessed by removing the base or cover (refer to your lamp's manual). Disconnect the old driver and connect the new one using the existing wire connectors. If in doubt, hire a professional. Unplug the lamp and follow safety precautions.
- Where can I find my lamp's model number?
- The model number is usually on a label on the underside of the lamp base or on the driver itself. For Asteria table and floor lamps, the driver is the same, so you don't need to distinguish between them for this part.
- What if the new driver doesn't fix the issue?
- If the lamp still doesn't work after replacing the driver, the fault may be elsewhere, such as the LED module or wiring. Contact UMAGE support for further troubleshooting or consult an electrician. Keep your receipt and check the return policy before ordering.
Product facts
- Asteria Driver Table & Floor lamp | spare part: The Asteria Driver is a spare part intended for the Asteria Table lamp and the Asteria Floor lamp. This ensures you get the correct replacement for your specific lamp model, avoiding compatibility issues.
Asteria Driver Table & Floor lamp | spare part
