Retour au blog
Guides pratiques 2026-11-20 Danish Design Lighting & Furniture – UMAGE US 1 vues

Canopy Bracket for Asteria Pendant: Installation Guide

Canopy Bracket for Asteria Pendant: Installation Guide

Learn how to install the Canopy Bracket spare part for your UMAGE Asteria mini or medium pendant lamp with this clear, step-by-step guide.

What Is the Canopy Bracket For?

The Canopy Bracket is a spare part designed specifically for the UMAGE Asteria pendant lamp. It is compatible with both the Asteria mini and medium sizes, making it a practical replacement component if your existing canopy bracket needs replacing. This guide explains how to install it safely, based on the confirmed compatibility information.

Canopy Bracket at a Glance

  • Canopy Bracket | spare part for Asteria pendant: The Canopy Bracket is a spare part for the UMAGE Asteria pendant lamp, compatible with Asteria mini and medium sizes. This confirms the bracket fits your existing fixture without modification, as long as you own an Asteria mini or medium pendant.
    Canopy Bracket | spare part for Asteria pendant
    Canopy Bracket | spare part for Asteria pendant

Installation Steps

The following steps assume you have already turned off the power at the circuit breaker and have the necessary tools (screwdriver, wire stripper, voltage tester). Always follow local electrical codes.

  1. 1. Remove the old canopy bracket: Unscrew the existing canopy from the ceiling. Disconnect the wires and remove the old bracket. Keep the mounting screws if reusable.
  2. 2. Attach the new Canopy Bracket to the ceiling: Position the bracket over the electrical box. Use the supplied screws (or compatible hardware) to secure it firmly. Ensure it is level.
  3. 3. Connect the wiring: Match the fixture wires to the house wires: black to black (hot), white to white (neutral), and green or bare copper to ground. Use wire nuts and wrap with electrical tape.
  4. 4. Mount the canopy and test: Slide the canopy over the bracket and tighten the screws. Restore power and test the light. If it does not work, turn off power and check connections.

What the Catalog Confirms

The supplied information confirms that this bracket is a genuine UMAGE spare part for the Asteria collection. It is intended for the Asteria mini and medium pendant lamps. No specific installation instructions or torque values are provided in the catalog, so always refer to the original fixture manual or consult a licensed electrician if you are unsure.

Articles connexes

Customer Service
Accueil
Produits
Panier
Profil