How to Clean and Maintain Your Komorebi Square Lampshade
By Danish Design Lighting & Furniture – UMAGE US | Published: 2026-10-29
Category: Tips & Care
Learn how to clean and maintain your Komorebi Square lampshade with gentle steps that protect its wooden lamellas and textile, keeping it beautiful for years.
Quick Answer
To keep your Komorebi Square lampshade in top condition, dust it weekly with a soft, dry cloth and spot-clean stains gently with a barely damp cloth. Avoid soaking the wood or textile, and always let it dry fully before re-lighting.
Why Gentle Care Matters for Wood and Textile
The Komorebi Square lampshade combines wooden lamellas with textile, so it needs a care routine that respects both materials. Wood can warp or discolor if it gets too wet, while fabric can stain or weaken with harsh scrubbing. That’s why the golden rule is: keep it dry, dust often, and treat spills immediately.
Because the lampshade is designed to create a calm, grounded atmosphere in your home, regular maintenance also preserves its visual warmth. A few minutes of gentle care each week will keep the natural materials looking their best.
Step-by-Step Cleaning and Maintenance
- Turn off and unplug the lamp: Always switch off the lamp and unplug it before cleaning. Let the bulb cool completely to avoid burns and to prevent any residue from baking onto the shade. Safety first: never clean a hot lamp.
- Dust gently with a soft, dry cloth: Use a microfiber cloth or a soft brush attachment on your vacuum to gently remove dust from the wooden lamellas and the textile. Work in the direction of the wood grain to avoid lifting splinters. Avoid using feather dusters, which can catch on the texture. Dust weekly to prevent buildup that can dull the finish.
- Spot-clean stains with a barely damp cloth: If you notice a spot, dampen a clean cloth with plain water (no soap) and wring it out until it’s just barely moist. Blot the stain gently, working from the outside in, without rubbing. For the textile, test on an inconspicuous area first. Avoid getting the wood too wet. Never soak the shade; too much moisture can warp the wood or shrink the fabric.
- Dry thoroughly before re-lighting: After any damp cleaning, let the lampshade air-dry completely in a well-ventilated area away from direct sunlight. Do not use a hairdryer or heater, as rapid heat can crack the wood or shrink the textile. Only reattach the shade once it is fully dry. Patience here prevents long-term damage.
- Handle with care during installation: When attaching or removing the lampshade, support it from the bottom with both hands to avoid bending the lamellas. Make sure the bulb is not touching the shade, as heat can cause discoloration over time. Proper handling extends the life of the shade.
About the Komorebi Square Lampshade
- Komorebi Square | lampshade: The Komorebi collection consists of multiple lampshades made from wooden lamellas and textile. This mixed-material construction means you need to adapt your cleaning method to protect both the wood and the fabric.
Komorebi Square | lampshade
